Skip to content
lastroll

Nikon · SLR · 35mm

Nikon FE2: Is It Worth Buying? Battery, Electronic Faults, FE2 vs FM2 and What to Check

Nikon FE2 buyer's guide: aperture-priority auto with a 1/4000 shutter, its LR44 batteries and M250 backup, common electronic faults, FE2 vs FM2, and a checklist.

Reviewed Nov 20, 20267 min read

Is the Nikon FE2 worth buying?

Yes, if you want a compact manual-focus Nikon that can also shoot in aperture priority. You set the aperture and the FE2 picks the shutter speed, steplessly up to 1/4000s. Switch to manual and you match two needles in the finder, which tells you far more than a three-LED display. Flash syncs at 1/250s, the fastest of any camera when it launched in 1983, and it supports TTL flash.

The trade-off is electronics. Without batteries, only the mechanical M250 (1/250s) and B settings work. After 40 years, electronic faults are the main risk, and repairers have no new parts for some of them. A good one is still very reliable; a flaky one can cost more to fix than to replace.

Buy one if you want aperture-priority auto with Nikon build quality. Skip it if you need a camera that fully works without batteries. Get the FM2 instead.

Key specs

Spec Nikon FE2
Type 35mm SLR
Made 1983–1987
Mount Nikon F, AI or later
Shutter Vertical titanium honeycomb blades, quartz-timed; 8s–1/4000s manual, stepless on auto
Mechanical speeds M250 (1/250s) and B
Flash sync 1/250s; TTL off-the-film flash with Nikon TTL Speedlights
Exposure Aperture-priority auto; match-needle manual
Meter 60/40 center-weighted, silicon photodiodes; EV 1–18 (ISO 100, f/1.4)
Film speed ISO 12–4000, set by hand (no DX)
Compensation ±2 EV in 1/3 steps; AE lock on the self-timer lever
Finder 0.86x, 93% coverage; K2 screen, interchangeable (B2, E2 optional)
Battery 2 × SR44/LR44, or 1 × 3V lithium
Accessories MD-11 / MD-12 motor drive (up to 3.2 fps on the MD-12), MF-16 data back
Size / weight 142.5 × 90 × 57.5mm, 550g body

How it works

Turn the shutter-speed dial to A (it locks there) and set the aperture on the lens. A light press on the release turns the meter on for about 16 seconds. A black needle on the left of the finder points to the shutter speed the camera will use.

In manual, a second needle shows the speed you’ve set. Line the two needles up for the metered exposure, or set them apart on purpose.

Two features hide in the self-timer lever. Push it toward the lens to lock the auto exposure. Set the self-timer and the mirror flips up as soon as you press the release, which cuts vibration at slow speeds. The FE2 has depth-of-field preview but no mirror lock-up.

The meter does nothing while you advance the film to frame 1; Ken Rockwell notes that the shutter runs at 1/250 on A during that time, so a capped lens can’t leave it open. It also doesn’t work on M250 or B.

Battery

For more detail, see our Nikon FE and FE2 battery page.

The FE2 takes two SR44 (silver-oxide) or LR44 (alkaline) button cells, or one 3V CR-1/3N lithium cell. The chamber is in the base. Unscrew the cap with a coin.

  • Battery check: advance to frame 1 and press the release lightly. If the black needle swings into the speed scale, the cells are good. Ken Rockwell adds that if the needle drops as soon as you take your finger off, rather than staying on for 16 seconds, the cells are low.
  • Without batteries: only M250 and B work. You can keep shooting at 1/250 with a handheld meter or sunny 16, so the camera isn’t dead, just limited.
  • Cold: Nikon’s manual warns that cold weather can stop the meter. Keep spare cells warm in a pocket.
  • Storage: the manual warns that cells left in for a long time can leak. Take them out if you’re putting the camera away.

Known issues

Dirty shutter magnets. ICT Camera calls this a common FE2 problem, and the FE has it too. Dirt on the magnets causes erratic speeds, or the shutter releases without timing an exposure and the mirror stays up. Cleaning fixes it.

Jittery needle. Camera-wiki describes a “jittery needle” that jumps around after a half-press as a typical sign an electronic part is about to fail.

Mirror stuck up in A mode. Camera-wiki also lists intermittent failure to complete an exposure on auto, with the mirror not coming back down. That needs a service. Also check the battery first: a very long auto exposure in the dark can look like a lock-up.

Auto mode stuck at one speed. On Photo.net, an FE2 owner’s meter worked in manual but froze on one speed in A. Repeatedly working the self-timer lever, including the AE-lock push, fixed it. Other suggested causes are dirt on the resistor ring under the shutter-speed dial or a fault in the auto circuit.

Broken FRE. Ken Rockwell says the main long-term risk for the whole FM/FE family is the “Functional Resistance Element,” the part that tells the meter which aperture is set. He says no new parts are available. If it breaks, the camera still fires but the meter doesn’t work.

Leakage and seals. Old cells leak, and the foam seals will be due on an unserviced body.

Nikon no longer services the FE2; independent repairers do.

What to check on a used FE2

  1. Power and meter. Fit fresh SR44s, wind to frame 1 and half-press. The black needle should swing into the scale and move smoothly as you point the camera at bright and dark areas. Watch for jitter.
  2. Auto exposures. On A, fire at a slow reading (cover most of the lens) and at a fast one. The mirror must come back down every time.
  3. Manual. Step through several speeds and check the needles match.
  4. AE lock. Push the self-timer lever toward the lens and release. Auto should keep responding to light afterward.
  5. Mechanical speeds. Remove the batteries and fire on M250 and B.
  6. Shutter. With the back open, fire at 1/4000 and 1/1000 toward a light. The blades should be flat, clean and undented. Never touch them.
  7. Battery chamber and seals. Look for corrosion and crumbling foam.

FE2 vs FM2

FE2 FM2 / FM2n
Shutter Electronic, mechanical M250 and B only Fully mechanical, all speeds
Speeds 8s–1/4000s 1s–1/4000s
Auto exposure Aperture priority None
Meter display Two needles + o − LEDs
Flash 1/250 sync, TTL flash 1/200 (FM2) or 1/250 (FM2n), no TTL
AE lock, compensation dial Yes No

Pick the FE2 if you want aperture priority, longer timed exposures and a more informative meter. Pick the FM2 if you want a camera that works fully with no batteries, or if you’ll shoot in extreme cold. Max Kent, who shoots both, finds the FE2 more likely to have problems after 40 years because of its electronics. Our FE2 vs FM2 guide goes further.

FE2 vs FE

The Nikon FE (1978) has a 1/1000s top speed, 1/125s sync, no TTL flash and a mechanical backup speed of 1/90. Its big advantage is lens compatibility: its AI tab flips up, so it can take pre-1977 non-AI lenses with stop-down metering. The FE2 can’t. The FE also has a dedicated battery-check lamp and switches its meter on when you pull out the advance lever.

Lenses

AI, AI-S, Series E and AF Nikkors with an aperture ring all work, with AF lenses focused by hand. G-type lenses have no aperture ring and won’t work properly. Don’t mount non-AI lenses unless they’ve been converted, or IX-Nikkor lenses for APS cameras, whose rear elements can damage the mirror. The manual also lists a few special lenses, including some early PC-Nikkors and long telephotos, that hit the meter coupling lever.

Who it’s for, and alternatives

Good fit: anyone who wants an aperture-priority camera with fast flash sync, TTL flash, and access to the huge Nikon lens range.

Not ideal: anyone who wants a camera that works fully without batteries, or wants program mode.

  • Nikon FM2: the mechanical twin. Same body family, same 1/4000 top speed, manual exposure only.
  • Nikon FM: older and mechanical, 1/1000 top speed, and it takes non-AI lenses.
  • Nikon F3: Nikon’s pro body of the same era, also aperture priority with a mechanical backup speed.
  • Minolta X-700: aperture priority plus program, but no mechanical speeds at all.
  • Pentax ME Super: smaller and lighter, aperture priority with push-button manual.

Used prices

Working copies (body only) sold on eBay US for about $144–$250 from Aug 22 to Nov 20, 2026. That is the middle half of 40 sales, item price before shipping, with parts-only and as-is listings left out.

FAQ

Does the Nikon FE2 work without batteries? Partly. The M250 (1/250s) and B settings are mechanical. Every other speed, auto exposure and the meter need power.

What battery does the FE2 take? Two SR44 or LR44 button cells, or one 3V CR-1/3N lithium cell.

Nikon FE2 vs FM2: which should I buy? The FE2 if you want aperture-priority auto and a needle meter. The FM2 if you want a camera that works fully without batteries.

Can I use autofocus lenses on the FE2? Yes, AF Nikkors with an aperture ring work, focused manually. G-type lenses don’t work properly.

Why is my FE2’s mirror stuck up? Check the batteries first: a long auto exposure in dim light can look like a lock-up. If it keeps happening on A with fresh cells, ICT Camera says dirty shutter magnets are a common cause, and cleaning fixes it.

Related cameras

Guides

Sources

  1. Nikon FE2 instruction manual — Butkus.org
  2. Nikon FE2 — Wikipedia
  3. Nikon FE2 — Camera-wiki.org
  4. Nikon FE2 Review — Ken Rockwell
  5. Nikon FE, FE2, FM, FM2, FM2n and FM3a comparison — Ken Rockwell
  6. Nikon FE2, FM2, FA: Shutter Service — ICT Camera
  7. FE2 light meter on Auto not working — Photo.net
  8. Nikon FE2 vs Nikon FM2: What's the Difference? — Max Kent
  9. Debut of Nikon F3 — Nikon Camera Chronicle

Last reviewed Nov 20, 2026.