Skip to content
lastroll

Canon · rangefinder · 35mm

Canonet QL17 G-III: Is It Worth Buying? Battery Fix, Light Seals and What to Check

Canonet QL17 G-III buyer's guide: the 40mm f/1.7 rangefinder, shutter-priority auto, the PX625 mercury battery problem and fixes, common faults and a checklist.

Reviewed Nov 21, 20265 min read

Is the Canonet QL17 G-III worth buying?

Yes, if you want a small rangefinder with a fast lens and you’ll sort out the battery. The G-III has a sharp 40mm f/1.7 lens, a bright finder with a large focus patch and framelines that correct for parallax, and a quiet leaf shutter that syncs flash at every speed. Canon sold about 1.2 million between 1972 and 1982, so they’re easy to find.

Two things to know before you buy. First, it was designed for a 1.35V mercury battery that’s no longer made. A common 1.5V substitute works but can throw exposure off. Second, nearly every copy that hasn’t been serviced has crumbling light seals, and many need a cleaning. The 35mmc reviewer’s advice is to buy one that’s been serviced, or budget for it.

Buy one if you want a pocketable camera with a fast lens and shutter-priority auto. Skip it if you want aperture priority or film faster than ISO 800. The Olympus XA is smaller and does aperture priority.

Key specs

Spec Canonet QL17 G-III
Type 35mm rangefinder, fixed lens
Made 1972–1982
Lens 40mm f/1.7, 6 elements in 4 groups; f/1.7–f/16; 48mm filter thread
Focus Coupled rangefinder, 0.6x finder, parallax-corrected framelines; down to 0.8m (2.6 ft)
Shutter Copal leaf; 1/4s–1/500s + B; self-timer
Flash Sync at all speeds; hot shoe and PC socket
Exposure Shutter-priority auto; manual (unmetered)
Meter CdS on the lens front; EV 3.5–17 (ISO 100)
Film speed ISO 25–800
Battery 1 × 1.35V PX625 mercury (see below)
Size / weight 120 × 75 × 60mm, 620g

How it works

Set the aperture ring to A and choose a shutter speed. The needle on the right of the finder shows the f-stop the camera will use. Red zones warn when there’s too much or too little light, and the camera won’t fire on auto then.

For manual, turn the aperture ring off A to a real f-stop. The meter switches off, so you set both speed and aperture yourself. Use a phone app or sunny 16.

The meter cell sits on the front of the lens, not behind it, so a filter is automatically allowed for. Karen Nakamura notes that the meter warns you if the lens cap is still on. The downside is that you can’t see a polarizer’s effect through the finder.

The QL (Quick Load) system means you lay the film leader across to a mark, close the back and wind on. No threading.

Battery

The G-III was designed for one PX625 mercury cell, about 1.35V. Canon lists 1.3V. Mercury cells were banned decades ago. Our mercury battery replacement guide compares the substitutes. Our Canonet QL17 battery page covers each option for this camera. Your options:

Option Voltage Notes
Zinc-air (e.g. Wein cell) 1.35V Closest match. Runs down faster once the seal tab is removed.
1.4V hearing-aid cell 1.4V Listed by Wikipedia as an option.
SR44 in an adapter 1.35V with a diode adapter Wikipedia mentions adapters with a Schottky diode to drop the voltage.
PX625A alkaline 1.5V Fits directly. Voltage changes as it runs down.

Alkaline: how bad is it? Sources disagree. Wikipedia says the alkaline cell has no voltage regulation and can cause errors of up to about 1.5 stops, underexposing when new and overexposing near the end. Karen Nakamura found the meter fairly tolerant and says print film handles the error fine. For slide film, use a 1.35V option.

  • Battery check: press the check button. The lamp next to the eyepiece lights if the cell is good. This lamp is the G-III’s main addition over earlier Canonets.
  • Without a battery: the shutter is mechanical. Set a manual aperture and the camera still fires at every speed, per 35mmc. Auto and the meter stop working.

Known issues

Light seals. 35mmc warns that most copies have “age-crumbling” seals. Gooey foam around the back and the door hinge lets light leak onto the film. Replacement is cheap and is part of any service.

Sticking shutter and fungus. 35mmc also lists sticky shutters and fungus in the lens or finder as common finds. Its advice: buy a clean copy that has recently been adjusted and had new seals, or pay for a professional cleaning.

Exposure error from the wrong battery. If your negatives come back consistently dense or thin, check the cell before blaming the camera.

What to check on a used G-III

  1. Battery check. Fit a cell and press the check button. The lamp should light.
  2. Meter. On A, point at bright and dark areas. The needle should swing smoothly through the scale.
  3. Shutter. Set a manual aperture and fire at 1/4s, 1/30s and 1/500s. Each should sound distinct, and the slow speed should be clearly slow.
  4. Seals. Open the back. Gooey or flaking foam means new seals are due.
  5. Glass. Shine a torch through the lens and look into the finder. Fungus looks like branching threads.
  6. Rangefinder. Focus on something far away. The two images should merge at the infinity mark.

Who it’s for, and alternatives

Good fit: anyone who wants a fast-lens rangefinder for low light, street photography or travel, and is happy with shutter priority.

Not ideal: anyone who wants aperture priority, ISO 1600 film, or no battery fuss.

  • Olympus 35 RC: smaller, also shutter priority, with a slower f/2.8 lens.
  • Yashica Electro 35: aperture priority with a 45mm f/1.7, but bigger and battery dependent.
  • Konica C35: smaller and simpler, programmed auto only.
  • Olympus XA: much smaller, aperture priority, uses common SR44 cells.
  • Olympus Trip 35: no battery at all, but zone focus and two speeds.

Used prices

We haven’t checked enough recent sold listings to give a reliable range yet.

FAQ

What battery does the Canonet QL17 G-III take? It was designed for a 1.35V PX625 mercury cell. Use a 1.35V zinc-air cell, an adapter, or a 1.5V PX625A alkaline (which can throw exposure off).

Does the Canonet QL17 work without a battery? Yes, in manual. The shutter is mechanical. Only the meter and auto mode need power.

Is the Canonet QL17 G-III a good first film camera? It’s a good one if it’s been serviced: fast lens, simple auto, easy loading. Budget for seals if it hasn’t.

Does the QL17 have aperture priority? No. It’s shutter priority: you choose the speed, it picks the aperture. You can also set both by hand.

What does QL mean? Quick Load. You lay the film leader to a mark and close the back, with no threading onto the spool.

Related cameras

Guides

Sources

  1. Canonet QL17 G-III — Canon Camera Museum
  2. Canonet G-III QL17 — Wikipedia
  3. Canon Canonet GIII QL17 — Karen Nakamura, Photoethnography.com
  4. Canonet QL17 GIII: Long Name, Great Camera — KEH
  5. Canon QL17 GIII review — Steve Ember, 35mmc

Last reviewed Nov 21, 2026.